HPE J9779A Aruba 2530 Series Fast Ethernet devices are fully managed Layer 2 edge switches delivering cost effective, reliable, and secure connectivity for business networks. This J9779A has 24 x 10/100 PoE+ ports with a power budget of 195W. Additionally the switch has two 10/100/1000 ports and two dedicated Gigabit SFP ports. Designed for entry level to midsize enterprise networks, these switches deliver full Layer 2 capabilities with enhanced access security, traffic prioritization, and IPv6 host support.
J9779A Specifications
|
Type |
Aruba 2530-24-PoE+ Switch |
System specifications |
Ports |
- · 24 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: half or full
- · 2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- · 2 fixed Gigabit Ethernet SFP ports
- · 1 dual-personality (RJ-45 or USB micro-B) serial console port.
|
Memory and processor |
Processor: ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 1.5 MB dynamically allocated. |
Mounting |
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available); horizontal surface mounting; wall mounting. |
Management |
IMC - Intelligent Management Center; command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C or Micro USB);IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB. |
Performance (IPv6 Ready Certified) |
1000 Mb latency |
< 1.1µs (LIFO 64-byte packets) |
100 Mb Latency |
< 1.7 µs (LIFO 64-byte packets) |
Throughput |
Up to 9.5 Mp/s (64-byte packets) |
Switching capacity |
12.8 Gb/s |
MAC address table size |
16000 entries |
Physical specifications |
Dimensions (W x D x H) |
44.2 x 32.26 x 4.45 cm (17.4 x 12.7 x 1.75 in) (1U height) |
Weight |
3.81 kg (8.4 lb) |
Electrical specifications |
Maximum heat dissipation |
99 BTU/hr (104.45 kJ/hr), (switch only: 99 BTU/hr; combined switch + max. PoE devices: 809 BTU/hr). |
Voltage |
100 - 127 / 200 - 240 V ac |
Current |
2.8/1.4 A |
Idle power |
21.8 W |
Maximum power rating |
237 W |
PoE power |
195 W |
Frequency |
50/60 Hz |
Environmental specifications |
Operating temperature |
0° to 45°C (32° to 113°F) |
Operating relative humidity |
15% to 95% @ 40°C (104°F), noncondensing |
Non-operating/storage temperature |
-40° to 70°C (-40° to 158°F) |
Non-operating/storage relative humidity |
15% to 90% @ 65°C (149°F), noncondensing |
Altitude |
Up to 3 km (10,000 ft) |
Acoustic |
Power: 31.7 dB, Pressure: 40.4 dB |
Safety agency certifications |
Safety |
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1 |